My hilly Eurorack Rack Data Sheet 
twat_destroyer
Last modified on
| Module | Row | Width | Depth | +12V | -12V | +5V | |
|---|---|---|---|---|---|---|---|
| 13 Modules (1 passive) | Row 1 | 103 HP | max 47 mm | 357 mA +12V | 282 mA -12V | 0 mA +5V | |
| 13 Modules (1 passive) | Total | 103 HP | max 47 mm | 357 mA +12V | 282 mA -12V | 0 mA +5V | |
 |
Ladik E-510 Envelope Follower Envelope Follower |
1 | 4 HP | 47 mm | 10 mA | 10 mA | 0 mA |
 |
x1l3 WRECKAGE POWER ELECTRONICS / HNW eurorack module |
1 | 14 HP | 26 mm | 20 mA | 0 mA | 0 mA |
 |
x1l3 SHARD Noise, drone and artifact generator |
1 | 15 HP | 36 mm | 50 mA | 10 mA | 0 mA |
 |
Error Instruments Tropical Noise NEO V3 black Experimental oscillator with a lot of CV Modulation |
1 | 11 HP | 30 mm | ? | ? | ? |
 |
Złob Diode Chaos Analog chaotic low frequency voltage generator |
1 | 3 HP | 45 mm | 10 mA | 10 mA | 0 mA |
 |
Doepfer A-180-3 Buffered Multiple |
1 | 4 HP | 20 mm | 20 mA | 20 mA | 0 mA |
 |
Doboz MIX123 mixing/offset/polarize |
1 | 4 HP | 35 mm | 18 mA | 18 mA | 0 mA |
 |
ADDAC System ADDAC309 CV to Expression |
1 | 4 HP | 35 mm | Module does not draw current | ||
 |
DPW Design P3 Pedal I/O Interface, pedal or line |
1 | 4 HP | 30 mm | 19 mA | 19 mA | 0 mA |
 |
Behringer 1630 Bode Frequency Shifter Bode Frequency Shifter |
1 | 14 HP | 30 mm | 110 mA | 110 mA | 0 mA |
 |
AI Synthesis AI018 Stereo Matrix Mixer Stereo 8 In, 8 Out Matrix Mixer |
1 | 18 HP | 35 mm | 20 mA | 15 mA | 0 mA |
 |
Noise Engineering Viol Ruina Analog resonant lowpass filter and distortion with internal modulation and envelope following |
1 | 4 HP | 26 mm | 40 mA | 35 mA | 0 mA |
|
|
Noise Engineering Viol Ruina Analog resonant lowpass filter and distortion with internal modulation and envelope following |
1 | 4 HP | 26 mm | 40 mA | 35 mA | 0 mA |
If you had a Unicorn Account you could export this sheet as a CSV file