Offer Details

Works great! Comes with power ribbon.-215 Trig/gate to MIDI (one octave or according to Jomox/Volca/General MIDI drum placement – one common MIDI channel)12 gate/trig inputs (one octave C-B) for triggering/playing notes on MIDI equipment.(requested by my friend for triggering samples = playing notes on an MIDI HW sampler and MIDI drummachine)Active gate = note_on at fixed velocity 120, gate ends = note_off, simply simple Short button press = octave up transpose (common octave for all inputs)Holding button = changes MIDI CH (1-16 gradually, common for all inputs)Settings (octave and MIDI channel) are memorized.New firmware (from 28/09/2015):12 gate/trig inputs, three modes (halftone=one octave C-B, Jomox Airbase99 and Volca Beats, see table) for triggering/playing notes/sounds on MIDI equipment or triggering drums.Active gate = note_on at fixed velocity 120, gate ends = note_off, simply simple Mode (halftone -> Jomox -> Volca Beats -> halftone…) is changed by holding button at power-up. Shipped with halftone mode set.To change from halftone to Volca it must be powered twice with button pressed (first power-on w. button pressed changes mode to Jomox, then must be switched off, second power-on w. button changes mode to Volca). Current mode is indicated by LED: halftone = 5 fast blinks, Jomox = 3 slower blinks, Volca Beats = 6 alternate blinks (long-short-long-short-long-short).Default values (after each mode change):halftone mode – notes 60 to 71, channel 1Jomox mode – notes 36 to 52 (see table), channel 10Volca mode – notes 36 to 75 (see table), channel 10Sounds in yellow are added for compatibility, they are not used by Jomox or Volca Beats but can be used with another drum machines (almost compatible with General MIDI drum placement).New firmware (from February 2017), TR-8 mode added:Mode (halftone -> Jomox -> Volca Beats -> TR-8 > halftone…) is changed by holding button at power-up.Short button press (under 1s) = octave up transpose (common for all inputs). Transpose is available in 7octaves in halftone mode and in three octaves in Jomox/Volca modes. Indicated by LED blinks.Long press (holding button for 1-10s) = changes MIDI CH (1-16 gradually, common for all inputs). Indicated by LED blinks, shirt blink = 1, long blink = 5 (for example long+long+short = CH 11).Holding button down over 10s disables setting button to avoid unwanted changes. Another holding over 10s enables setting button again.All settings are memorized (mode, transpose, MIDI channel and button lock).Width: 8TE/ 8HP/ 40mm.Depth: 45mm /1,8″ max.Current: 20mA max.Power cable included.