Offer Details

Perfect / New condition. Slight screw marks as this was taken from a Studio Electronics system and shipped as such. Supplied with power cable.Please check my listings for combined postage and deals.Dual Attenuator/Lag Generator/ MultWe like to think of our Attenulag as a multi-purpose heavy lifter. The attenuators reduce level, audio or CV, when switch is set to off. With the switch up the audio/signal passes through at full level. The inputs are linked together: patching into channel 1 drives both attenuators; patching into channel 2 breaks the link. Experimentation with key tracking to create alternative tunings, or interaction with audio inputs that don't afford attenuation—does good things. The two lag circuits provide a handy CV mult/hub for oscillator and filter tracking (perfect for CV-ing up our OSCILLATION module with its switchable one in/three out structure for both attenuation and slewing—x2) and are linked together: if you patch into channel 1 only, the outputs of both channels are driven (just like the attenuation circuit); patching into channel 2 breaks the link and they become two separate CV mult/lag circuits.Four PotsATTENUATE 1, ATTENUATE 2, LAG TIME 1, LAG TIME 2.Four SwitchesOFF: the top two handle attenuation duties; the bottom are wired to lag time.Ten Patch PointsATTENUATE 1: IN, OUT; LAG TIME 1: IN, OUT 1A, OUT 1B, OUT 1C; ATTENUATE 2: IN, OUT; LAG TIME 2: IN, OUT 2A, OUT 2B, OUT 2CCommon Controls and Patch PointsAttenuationATTENUATE – Level reduction.IN – Attenuation input.OUT – Attenuation output.OFF – Bypass is in up position.LagLAG TIME – Slewing (some call it glide) amount.IN - Lag input.OFF – Lag bypass.OUT A – Lag output A.OUT B – Lag output B.OUT C – Lag output C.VitalsSize - 10hpDepth - 25mm with ribbon cable attachedPower Usage - 15mA