an Envelope Generator with voltage controlled Delay (Positive/Negative), Attack, Hold , Decay, Sustain (Negative Hold) and Release.

• all stages have CV inputs

• all stages have state gate outputs to trigger other events (e.g. envelopes)
  or to act as a 6-step non-linear, free-running, trigger sequencer.

• Linear/Exponential controls for Attack, Decay and Release

• Internal Delay mode
  0 to 5V delays the start of the envelope
  0 to -5V chops off the beginning of the attack stage (starting the envelope above 0V)

• External Delay mode for processing gate signals, doesn't affect the envelope
  0 to 5V delays a gate signal and outputs through DEL STATE OUT
  0 to -5V changes the length of an incoming gate and outputs through DEL STATE OUT

• One Shot Trigger mode
  Delay Time : Attack Time : Hold Time (@5V) : Decay Time : Negative Hold Time (@-5V, controlled by Sustain Knob) : Release Time (returning to 0V)

• Loop Trigger mode
  the same structure in a loop (LFO)
  Gate In doubles as Sync input

• Sustain Trigger mode
  standard Sustain stage, the knob controls Sustain Level from -5V to 5V

• Loop Input
  CV switch of the loop mode.
  In Sustain Trigger mode, longer gate to Gate In suspends the loop for the duration of the gate and resumes the loop on gate off.

• Trigger Out: outputs a sequence of short pulses for all envelope stages

• Manual Envelope trigger button

• Polarity switch: AC, DC

• Speed Range switch: audio, medium, slow

• 1V/OCT CV input controlling all stages

• all state outputs can output either full gates or just short triggers
  selected with a jumper on the PCB

• ? mA +15V
• ? mA -15V
• ? mA 5V

This Module is an early prototype, a concept in development, or an AI mockup