Oscilloscope / Pedal Interface

This is the Elby Designs ED702 Oscilloscope and pedal interface in the 5u DOTCOM format.

Now why did this combo come about, you ask? Simply from a special order, in which the customer wanted both a Scope and Pedal interface in 1 nice module.

The pedal interface works much like the Synthsizers dot com Q142 module in a single version, and the scope works like this:

The DataLogger section at the top of the screen displays:-

Vpp - Shows the difference between the exteme Maximum and Minimum values
Vavr - The Average reading is the mean vertical level of the entrie captured waveform
Freq - The Frequency is the inverse of the Period and is measured in Hertz
Pressing the [SELECT] button steps the user through the various control settings displayed around the edge of the screen, the currently active setting being highlighted within a blue frame. AT each setting, pressing the [-] and [+] buttons will step through the available options.

Pressing the [HOLD/OK] button will freeze the current display allowing for closer inspection of the input signal.

Pressing the [HOLD/OK] button while in the lower left corner of the screen, the user can toggle the [AUTO SIZE] ([A.S]) function on and off. When enabled, [A.S] will automatically resize the input signal to fill the scope display area. This is useful when you have a signal on the display which doesn't optimally fit in any of the [VOLTS/DIV] settings. The DataLogger still displays the correct data for the input signal.

• 90 mA +15V
• 10 mA -15V
• ? mA 5V

This Module is currently available.