modulargrid

the issue is because of links,
-- zardoz-cron

Tell me the URL, if it is a legit one I can whitelist it.

Beep, Bopp, Bleep: info@modulargrid.net


the issue is because of links,
not dm

Your message contains a link that is not allowed. Send legitimate URLs to info@modulargrid.net, or upgrade to a Unicorn Account.


@markylorenzen is an excellent trader, I did 2 trades with him, fast, kind and nice communication : highly recommended..

If you need help with a module I own/sell, I'll be happy to help, don't hesitate!


Actual coaxial. The point is to shield the signals against interference and cross-talk.


Gross, like everything related to this sleazy company.
-- murmurant

I find it better than the original. This panel is ugly but nowhere near as ugly as most MN modules.


Gross, like everything related to this sleazy company.
-- murmurant

I find it better than the original. This panel is ugly but nowhere near as ugly as most MN modules.


Hi guys

Would you say I have a good balance of sound sources, modulation, and utilities in this case, or do you feel that the setup is still lacking in coherence?

I’d like to use this case for both techno and ambient.

ModularGrid Rack


Do you mean actual coaxial cables or just 8 bipolar ones?


Thank you for that. I feel much the same way and haven't made the move yet.


In my opinion the best option is to wire up each pair of jacks with shielded cable. That would mean 8 coaxial cables going left-to-right.


noodle_hut

Pretty neat little thing. Sounds great so far.
I wanted to make something that pushed me in different directions from tradition,
so there's a Doepfer ribbon controller driving two of Moogs oddest modules with the Mavis intended as the ribbon's front and back end.
The red panels came from a guy on etsy, very nice work, but I left the wood panels too. Moogs gotta have the wood.

It took 44 of those little knobs Moog used to sell to complete it.
Looks so much nicer, and they work and feel way better too. I don't understand why they didn't come with those in the first place.
Moog knew they were needed, would have only cost them a few bucks, and they made and sold($$) them, but were discontinued.
I don't get that.

The new ribbon controller works well so far, it's jumpy in pitch sometimes, but it's early and I'll figure it out.
Lots of possibilities; MIDI and/or CV, three seperate outs or one into another, sequencer/ribbon/keyboard control...
The A-185 adder helps. Lets me change octaves with a switch, and an input to add wobble or fine tune it, with three CV outs to feed everything.

It all seems to work so far. The Spectravox is a very peculiar animal, and the Subharmonicon is an engineer's fever dream.
Thanks to Dieter Doepfer for not forgetting the ribbon and his persistance in bringing out the improved A-185. Good job.
Lots to explore, but I won't be boring you with video. Nobody wants that :)

P.S. Finally played with it tonight. It's a screamer. Controller is expressive and sensitive. I have to figure out legato and envelope retriggering.

--


Next week I'll start building a new case of 12 mm plywood. It's going to be 126HP 2x 3U. In the middle I plan to make a 500 wide free strip of plywood. It's going to be the cable 'highway'. Modules on the bottom with jacks on the top and vice versa so all cables can route neatly through the middle and modules are nice and accessible for play. I plan to bolt 3 6HP panels onto it with some very basic passive functions that I can always use, like mults, cascaded mult, A/B switches on the ends and an internal routing of 8 jacks to the other side to save on cable length in a pretty wide case. in blue I sketched the connections that I want to solder on the back. Now my question is as follows. What do I do with the ground wiring? These seem to be the options to me:
A) don't connect the grounds at all
(some of the 8x portal modules are connected with CAT network cables, these have 8 wires so I think only the tips are connected by these modules)
B) connect the grounds locally on the left and right sides seperately, so 8 on the left connected to each other and on the right side same
C) connect 8 grounds per side and have 1 connection for ground between left and right
D) connect each ground to the corresponding one on the other side just like the tip connectors. Meaning 16 wires go from left to right

I really have no idea which option to choose. Do any of you have experience with this?


tobimx

Hi,
is it possible to extend the amount of collections a user can have from 1 to m a n y?

Reason: I want to be able to maintain a wishlist of modules in a different collection and not in another rack. And if the moudles of the other collection would look slightly differnt (image alpha, contrast, ...)This would help me a lot in composing new racks...

I posted it in a thread because I'am curious if anybody has also use cases for a "multiple collections" feature.
cheers


TangoDelta

You're very welcome! I'm really looking forward to the Module!

Thanks Nick!

Best Regards,

Tim / Tango Delta



Pioneer123


flexxmexx

Hi sidechain,

super strange I bought a MakeNoise Polimaths form HetBenIk

The conversation went on for a while. But in the end, I bought the module from him and, luckily, paid via PayPal. Maybe I can help you with some details. But I only have his email address from PayPal.

Please always pay with PayPal and use buyer protection in the future. I’ve been scammed before in Germany on classifieds sites, too.
Best regards

Best regards


Jukeshoe

Brilliant, outstanding transaction with @TangoDelta!

Easy, detailed, timely communications and payment.

Highly recommended!

“You must have chaos within you to give birth to a dancing star.”
― Friedrich Nietzsche


Jukeshoe

Thanks again, Tim!

Glad our clocks sync'ed!

Enjoy!

“You must have chaos within you to give birth to a dancing star.”
― Friedrich Nietzsche


1U in 3U spaces to represent a converter?

I am thinking about adapting, but now realizing that this does not work unless you preemptively set the entire row.
I think a button to allow 1U to fit in top/mid/bottom of a 3U space would be amazing.


TangoDelta

Jukeshoe,

Wow! You must've picked up my brain wave....just a few minutes ago I was thinking I might be interested in parting with mine.

PM me and we might be able to work something out!

I sent you a Message / PM. Awesome that we were both thinkning similar things at similar times! I think our Clocks must have become Synced!

Best Regards,

Tim / Tango Delta


toptier

The check is not instantly, it takes a couple of minutes, so the messages popup won't work as expected. But you're right, at least it should be better explained ...

A short static infobox on the submit listing page would probably do just fine. Similar to how it appears on live listings, regardless of a user using a VPN or not.

The problem we had in the past was that user accounts with weak passwords got hacked. In such cases the verified checkbox would be counterproductive. We are experimenting with a trustscore system, but, like the voting system, that will lead to a new level of drama, Mr. 78/100.

2FA based on TOTP as a start would genuinely improve account security massively. To keep it a bit more user friendly, you could make it an optional setup for account creation, but mandatory for creating marketplace listings as well as interacting with the voting system. Using an IP or browser based trust system, most users would only occasionally have to enter their 2FA code, while keeping intruders out very effectively. Passkeys could be an additional layer alongside TOTP, but from my experience, passkeys don't always play well with every browser and it can be quite a headache to use when a user switches devices frequently.

With data breaches happening so frequently and the vast majority of online users having little knowledge about account security in general, it's just too easy to have an account compromised (or even a multitude of accounts for those who reuse their passwords). That's not even factoring in the use of generative AI making it significantly easier for hackers to compromise user accounts.

Not to step on any toes, I know a website like MG takes a lot of resources to maintain, but I personally find it nonsensical for VPN warning to be a thing while not offering any form of 2FA for basic account security. Yes, it isn't as user friendly, but anyone who can grasp the concept of modular should easily be able to set up 2FA, which they most likely already have done previously with other services anyway.


noodle_hut

You probably haven't seen one of these yet.
Came today after waiting all summer. Yay!



Too busy today, maybe I can play with it tonight. Here's the system it's going into:
ModularGrid Rack

--


Jukeshoe

Wow! You must've picked up my brain wave....just a few minutes ago I was thinking I might be interested in parting with mine.

PM me and we might be able to work something out!

Hello,

Does anyone out there have one of these that they wouldn't mind parting with? I've been looking for one for a while now and figured why not just put a Post here about it? It looks like it is sought after by a lot of Knob Twiddlers out there!

Let me know and maybe we could work out a Trade or Purchase!

Thanks!

-Tim / Tango Delta
-- TangoDelta

“You must have chaos within you to give birth to a dancing star.”
― Friedrich Nietzsche


TangoDelta

Hello,

Does anyone out there have one of these that they wouldn't mind parting with? I've been looking for one for a while now and figured why not just put a Post here about it? It looks like it is sought after by a lot of Knob Twiddlers out there!

Let me know and maybe we could work out a Trade or Purchase!

Thanks!

-Tim / Tango Delta


Jukeshoe

Sorry for your loss.

I recommend posting your experience here:

https://modulargrid.net/e/forum/posts/index/8228

“You must have chaos within you to give birth to a dancing star.”
― Friedrich Nietzsche


trevormeier

Ah I'm really sorry to hear that @sidechain. Communities like this require a lot of trust and it's really sad when someone takes advantage of it like that. Sending you good vibes and good fortune to recover what was taken (and more). All the best to you.


Sorry to hear that. This is why I can't recommend paypal goods and services enough. Been scammed twice here, second time I paid by g&s and was able to get all my money back...


Thank you! 🫶


Jukeshoe

Beautiful camp sites and beautiful groove!

Thank you for sharing!!!

“You must have chaos within you to give birth to a dancing star.”
― Friedrich Nietzsche



To all,
I came across a crook on MG. User HetBenIk (now gone) took 900 euros from me and disappeared. This thread is more a warning that here also, people will try to scam you. I feel so dirty and ashamed today. Our world definitely sucks.


modulargrid
Thread: Change Log

Rotate Linked Modules

Three 2HP modules, one 1U adapter!

Linked 3U modules with a combined width of up to 6HP can now rotate together and fit into a 26HP adapter in a 1U row.

Hover over a module in the group and use the flip button, or press F while keyboard shortcuts are enabled. The whole block rotates together, keeping the module order and relative panel orientations intact. It also stays linked when using Optimize Rack Space.

After rotating, drag the group into a 1U row. If you reload before placing it, the group will be waiting on the workbench.

To unlink or delete a member, rotate the group back upright first.

Beep, Bopp, Bleep: info@modulargrid.net


modulargrid
Thread: Undo?

A candidate for the longest support ticket of all time.
It took 12 years, but now we have Undo!

Beep, Bopp, Bleep: info@modulargrid.net


modulargrid
Thread: Change Log

Undo / Redo

Not V for Vendetta but U for Undo!

You can undo module moves, additions, duplications and deletions, including movements involving linked modules or Fuzzy Swap.
Optimize Rack Space can also be undone, so experimenting with a different layout is a little less adventurous.

Find Undo and Redo at the top of the Edit menu, or press U to undo and Shift + U to redo while keyboard shortcuts are enabled. Multiple steps are supported.

The history is kept for your current tab and resets when you reload the page. It covers module placement changes, not every rack setting.

Beep, Bopp, Bleep: info@modulargrid.net


modulargrid

Would it be possible to have a message pop up when we are about to list a module for sale and MG detects that we're connected via a VPN network?

The check is not instantly, it takes a couple of minutes, so the messages popup won't work as expected. But you're right, at least it should be better explained ...

Another solution could be to offer profile verification to users in order to obtain a verified status/checkmark

The problem we had in the past was that user accounts with weak passwords got hacked. In such cases the verified checkbox would be counterproductive. We are experimenting with a trustscore system, but, like the voting system, that will lead to a new level of drama, Mr. 78/100.

verifying the details of anyone with a Unicorn account,

Also good idea but won't fix the problem with hacked accounts. We might have keypasses for the offer section at some point.

A quick workaround: if you click edit on one of your offers and save with or without changing anything, the VPN check will run again.

Beep, Bopp, Bleep: info@modulargrid.net


modulargrid
Thread: Warning

For those unaware, spoofed emails can be very convincing and taken for legitimate without you knowing it was spoofed. Spoofed addresses can be made identical to official MG addresses on the surface.

We are using DMARC signed emails. Most emails servers will not deliver spoofed MG emails. Or at least send them to SPAM.

Another thing I strongly advise anyone who received a phishing email from MG, is to check if your email address has been exposed in a data leak.
-- toptier

There was no leak. It's like @pibou said: someone just registered new accounts with username "SystemAlertX" and tried to automate the sending of phishing mails with the MG messenger. We have a limitation of 3 messages per user/hour. This is not to upsell unicorn accounts but to prevent the spammers from spamming to all users. Those of you who got the phishing mail are lucky winners, so to speak.

I do what is reasonable to fight scammers, but at some point security becomes a prison. Nobody wants to fill out a CAPTCHA for every message they want to send, and I think it would be quite excessive to require users to provide IDs or phone numbers just so they can use a modular planner...

Beep, Bopp, Bleep: info@modulargrid.net


Thread: Warning

Another thing I strongly advise anyone who received a phishing email from MG, is to check if your email address has been exposed in a data leak. Generally, email addresses stay hidden in a website's database unless a leak has happened.

this is not the case, the attacker just created dummy accounts and sent phishing messages to ModularGrid users without knowing their email adresses


Thread: Warning

Thanks for the detailed info!

Yes, the email did say someting about reactivating my suspended account.
What looked very suspicious was the link ending on be.com or something.

Keep safe!


toptier

I recently noticed the yellow/orange warning that is displayed on listings that were created over a VPN connection. It's a good thing, but I never knew this was a thing until I saw it on someone elses listing, and found out that this was also the case for my own listings, as I generally use a VPN to hide my traffic from my ISP. This in turn made me realize that this warning may have been the very reason for my modules barely selling lately despite listing them at very generous prices, prices that I genuinely feel are too low, but would leave me without any sales if I didn't list them as low as I have.

Would it be possible to have a message pop up when we are about to list a module for sale and MG detects that we're connected via a VPN network? I absolutely don't mind exposing my real IP to MG if that means I can have the warning disappear from my ads, but as is stands right now it feels more like a flag that a user is a potential scammer while this much more often than not, is not the case. It kind of invalidates my 30+ positive ratings because it genuinely looks like my account in specific got flagged for suspicious activity to anyone unfamiliar with the system.

Another solution could be to offer profile verification to users in order to obtain a verified status/checkmark, this would then also eliminate the VPN warning from their listings. This can most likely already be done by verifying the details of anyone with a Unicorn account, as payments are generally well-backed by identity verification on the payment platform's end.

tldr: VPN warning is a good thing in concept but could use some work in practise.


toptier
Thread: Warning

For those unaware, spoofed emails can be very convincing and taken for legitimate without you knowing it was spoofed. Spoofed addresses can be made identical to official MG addresses on the surface. Only when you closely inspect the message headers of an email you received, can you tell whether it's legitimate or not. So if in doubt, or if the email contains a link asking you to log in, just delete and ignore it.

Another thing I strongly advise anyone who received a phishing email from MG, is to check if your email address has been exposed in a data leak. Generally, email addresses stay hidden in a website's database unless a leak has happened. This doesn't mean that MG had a data leak (we'd know by know), but it is very likely that your address has been leaked elsewhere and that scammers are just fishing (phishing) for someone who does happen to have an account here. Aged accounts with positive ratings are likely very very lucrative for scammers as they can easily list some modules for cheap, scam several users out of their money and disappear just like that.


Pioneer123
Thread: Axiom


Thread: Warning

I got the same message today.

Cheers


noodle_hut

I recommend maintaining a good relationship with your opthamologist.

--


modulargrid
Thread: Warning

Received message below from account SystemAlert15 created today

SystemAlert1, SystemAlert2 to SystemAlert15 wrote the same message.

This is a phishing attempt. It has of course nothing to do with ModularGrid. Do not click any links!
I have suspended all scam accounts, deleted the messages and contacted all users that were targetted.

Beep, Bopp, Bleep: info@modulargrid.net


Thread: Warning

Received message below from account SystemAlert15 created today

Complete Verification.

Your ModularGrid account has been temporarily restricted.

We have updated our Privacy Policy. In accordance with the new Privacy Policy, your account will remain under review until the verification process is completed. This step helps us maintain the security and protect the personal data of all our users.

A ModularGrid support representative will guide you through the necessary steps on the verification page.

To verify your information and regain full access to your account, please use the secure link:

https://tinu.be/modulargrid

If you can't click on the link, copy and paste it into your browser (Safari/Chrome, etc.).


Sounds really cool !

Keep up the great work..


Aîkido (mixer/VCA/Side Chain/feedback and more) of Bastl does a lot in this vein, I used it as a swiss army knife and it pairs fantasticly with Dark Matter, it can do side chain, VCA, env. follower, it has clickless mute buttons, can do feedback too.. And their small but powerful Waver (not in production anymore but maybe in the second hand market) mixes too, and add wavefolding and "break" (another way to feedback and break the signal) to the equation..

Oops I forgot, Aîkido can do submix too, super practical so you could apply FX on a given couple of signals, then it's side-chained (for example)...

Not to mention the guys there are very very kind (and funny, actually).

I think this is also a very interesting module: Neo Trinity from Bastl Instruments https://modulargrid.net/e/bastl-instruments-neo-trinity Have you ever used it?


modulargrid

We have a hourly limit of how many messages you can send as spam bot protection. Just wait a bit or get the Unicorn account which does not have that limit.

Beep, Bopp, Bleep: info@modulargrid.net


Dear Community,

do you have any feedback on my Rack? I'm making experimental/ambient/generative Stuff with this, like it a lot. Frap Tools 411 and 321 and Plexiphon are not racked/tested yet. I unracked Plaits and Beads as I struggled with their sound a little. Any feedback is appreciated!

ModularGrid Rack
ModularGrid Rack