has anyone plsyed with the Morphor 4hp sequencer? they look interesting and capable depending on the application. 4 outs from 4hp is pretty wild!


I have noticed this issue with out of date Reverb listings showing up well after the listing ended too.

I can cite an example: Right now you can look up the Pittsburgh Modular Lifeforms Touch Controller and it shows 1 listing on Reverb:
https://modulargrid.com/e/pittsburgh-modular-lifeforms-touch-controller

However, that Reverb listing sold in early May, almost 4 months ago.


Still curious if anyone has used Tembra stuff? They've released a lot recently and they seem like promising modules.


Just wondering what your favorite euro FX modules are and why? I traded out one of my Versios and am considering a variety of new effects to go in its place (Versio is great, but I already have 3 others).

A few I'm considering:

  • Befaco Iroi
  • OK Instruments Spill
  • dsp.coffee Kali
  • Make Noise Mimeophon (have owned before, I know it's great!)
  • DNiPRO Radiant

Any other ideas? Trying for something


That's a bummer. I dunno if it's legit supposed to be 8 or 9, but I know I had a Die Antwoord which is supposed to be 13HP, but really wanted 14HP. I was able to get it into 13 HP at the end of the day, but I really had to squeeze it, and I could only get it into my big rack, trying to fit it into a 4MS Pod was a nightmare. For anyone struggling with this or a similar module, I'd say try putting the whole row in very loose around it, then screw down the Error module first then the others around it, and it should work.


Very cool little bit-crushing filter, love the Chromatic line by Dreadbox.


What I love about Sarajewo is the independent access to the 3 tap outputs. This makes routing complex effects chains very easy. It does run a bit quiet in my opinion, but I suppose that's the trade-off for a "quiet"/no-clock-whine BBD. I like to pipe mine into a Fala Versio (or even a Ruina) to give it some extra oomph.


There is a reason a lot of people in euro avoid this company. Crap quality is just one of many.


Haven't owned but have heard very mixed things tbh. That said it looks fun. If you ever get one and try it out let us know what you think.


Absolutely this:

Noise Engineering Mimetic Digitwolis

4 channels of quantized or unquantized CV or triggers or gates (or quantize incoming CV), very easy to dial in custom sequence lengths and to zero, randomize, or tweak on the fly. Incoming CV can be customized as to what it affects. Menus are colorful and easy to understand once you get your head around them. Takes a minute to understand how global settings effect everything but it's really a great module in 10HP, ideal I would say for sequencing for smaller cases.


UPDATE — August 26:
morogfar has now replied and provided me with a detailed written declaration containing the relevant shipment information: contents, value, shipping date, parcel shop, packaging and tracking number. The communication issue is therefore resolved from my side, and I can now proceed with the Hermes claim.

www.raphaellanguillat.com


maxhodges

2) Is there a way to reset the module to a "factory default" state as I bought mine and all EGs have been mesed with.
Thanks for any hint,
Loersatz
-- Loersatz

Activate the maintenance menu by powering up your system with Zadar’s MENU button pressed.

Initialize is in there. Opt 3 I think.


This video is largely responsible for me getting into eurorack.

My own tips for good friends for DFAM start with Pam's and Disting. Attenuators and envelopes are also good, maybe a modulation mixer. Either a quantiser or external sequencer can be nice.

If you really want do do techno, I'd also recommend getting a seperate voice for the kick, and maybe the hats, but this could just be another drum machine.
-- the-erc

I think I will try techno at some stage.
My music so far has been mother-32 based -

and

The rest have been more ambient soundscapes - like

Is https://modulargrid.net/e/serendipity-d-thing- good for DFAM?
Cheers,
voigtstr


the-erc

This video is largely responsible for me getting into eurorack.

My own tips for good friends for DFAM start with Pam's and Disting. Attenuators and envelopes are also good, maybe a modulation mixer. Either a quantiser or external sequencer can be nice.

If you really want do do techno, I'd also recommend getting a seperate voice for the kick, and maybe the hats, but this could just be another drum machine.


Save yourself while you still can.
-- noodle_hut

I'l try and limit myself to a stack of Moog semi modulars (and possibly the Matriarch) and two arturia rackbrute 6Us (in wood rather than Noir)

If I buy more modules than will fit in the two rackbrutes then I'll have to swap something out. There. Limits. That will help surely!


noodle_hut

Save yourself while you still can.

--


Cheers!


I've got Mother-32 and DFAM.
I'm thinking of getting some modular at some stage to have it work with the Moog stuff.



Moog Mother-32
Hologram Electronics Microcosm

What do you reckon?


Pomodoro
Thread: Substation


Is the Instrument interface the right front end for line-level gear?
Does the A-138m earn 4x4 in only 64hp?
and Im also wondering if uRings would be enough of a resonator to justify the space next to Interstellar Radio?
Appreciate your input!


Thanks! Smooth transaction with @Loersatz!


Loersatz

It was very nice dealing with @farseer34
Bought a Cosmotronic Cosmix mixer from him.
Module was posted on Tuesday from Poland and arrived Thursday the same week in south of Spain.
Nice packaging and module in perfect conditions.
Thank you :)

"I've seen things you people wouldn't believe... Attack ships on fire off the shoulder of Orion. I watched C-Beams glitter in the dark near the Tannhäuser Gates.
All those moments will be lost in time, like tears in rain. Time to die..." R. Hauer


Hi everybody,

I wonder if anyone knows the production status of && (Ampersand Ampersand) Wear & Tear module, as I've heard conflicting reports about whether they are still being made and still no answer from the company themselves.

Also, If anyone has this module for sale, I would be very interested.

Thanks,

Matt.


Shout out to @ModularFlow for a smooth international transaction on a Metasonix tube module. Communication was great, price was fair, module arrived in good order. Thank you!


Always found FX Aid pretty undwhelming tbh, and most anything spin chip based likewise, but I'm definitely on the hunt for a more robust effects units. Right now Versio is my jam, love the Versio firmwares, but am open to a new one.


This company seems interesting -- I particularly like the idea behind their EXHALE module.


Gross, like everything related to this sleazy company.



Link Modules

Adjacent modules can now be linked into a single block and moved together. Linked blocks stay connected when using Optimize Rack Space!
Finally your expander modules stay in place!
-- modulargrid

Thank you for this nice feature!
I dont know if this is relevant - but i noticed that this feature is very hard to use with 2hp modules.
consider to apply an y-offset on overlapping link buttons.


Loersatz

This just showed up...
https://rubato.audio/plaits-palette/

"I've seen things you people wouldn't believe... Attack ships on fire off the shoulder of Orion. I watched C-Beams glitter in the dark near the Tannhäuser Gates.
All those moments will be lost in time, like tears in rain. Time to die..." R. Hauer


modulargrid
Thread: Change Log

Link Modules

Adjacent modules can now be linked into a single block and moved together. Linked blocks stay connected when using Optimize Rack Space!
Finally your expander modules stay in place!

Beep, Bopp, Bleep: info@modulargrid.net


halbroome

In the process I used AI for setting suggestions. "We" also came up with an interesting experiment
using the Roland JC-40 FX loop to divert the modulation Loop 2 of the Swiss Things through.

Dare I try it? I fear awful oscillation (which might be cool, who knows. . . .)

Guitar Rig Strategy & Signal Chain Blueprint

A summary of the recent configuration notes for the Xotic EP Booster, Wampler Mini Ego, Chase Bliss CLEAN, Strymon Volante, and Roland JC-40 setup.

1. Xotic EP Booster Internal DIP Switches

To capture the vintage Echoplex Maestro EP-3 preamp tone:
* Switch 1 (+3dB Boost): OFF (Down) - Keeps baseline at unity gain to match original EP-3 behavior.
* Switch 2 (Bright Switch): OFF (Down) - Tames clinical highs and accentuates natural warmth/low-mid fatness.
* External Gain Knob: Set fully counter-clockwise (at zero) to act strictly as a tone-sweetening preamp wrapper.

2. Front-End Chain (Before EQD Swiss Things)

Designed to shape guitar dynamics and prime the signal before entering the main loop controller:
1. Guitar ➔ Wampler Mini Ego Compressor
* Settings: Volume at Unity (~10-11 o'clock), Sustain at 12 o'clock, Blend at 11 o'clock (parallel compression preserves pick attack), Attack & Tone toggles UP (Bright/Fast) to maintain articulation before entering the warm preamps.
2. Xotic EP Booster (Always-on, Vintage Setting)
3. Chase Bliss Condor mkII (Gain/EQ)
* Settings: Kept clean for now. Use Bass at ~11 o'clock if the low-mids get too boomy, give a gentle push around 800Hz–1kHz for mid-forward tape playback character, and use LPF if modulation gets piercing.
4. EQD Swiss Things INPUT

3. EarthQuaker Devices Swiss Things Loops

  • Loop 1 (Unbuffered / Dirt): Wampler Tumnus ➔ Chase Bliss Wombtone ➔ EQD The Depths
  • Loop 2 (Buffered / Ambient): Chase Bliss Mood mkII ➔ Chase Bliss Onward

4. The FX Loop "Dual Echoplex" Mono-to-Stereo Routing

An experimental configuration mapping the Roland JC-40 FX Loop into a self-contained studio mastering line:
1. JC-40 FX Loop SEND (Mono) ➔ Long guitar cable running up to the Xotic EP Booster (on top of the amp).
2. Xotic EP Booster Output ➔ Short patch cable to MXR Booster Mini (on top of the amp).
* MXR Internal Trimpot: Dialed back to 25%–30% (9 o'clock) to blend subtle Echoplex saturation without heavy distortion. External Volume at unity (~8-9 o'clock).
3. MXR Booster Mini Output ➔ Long guitar cable dropping back down to the Chase Bliss CLEAN Compressor Mono Input (on the floor board).
4. Chase Bliss CLEAN Stereo Output ➔ Short TRS-to-dual-TS Y-cable (Stereo Insert Cable).
* Setting: Flip MISO (Mono In, Stereo Out) dip switch ON.
5. Strymon Volante Stereo Inputs (L/R) (Sound on Sound Mode)
* Setting: Wear and Mechanics knobs at ~1 o'clock to introduce authentic tape degradation into the SOS layers.
6. Source Audio Ventris Stereo Inputs (L/R) (Or interchangeable stereo reverb like the EQD Avalanche Run)
7. JC-40 FX Loop RETURNS (L and R)

5. Amp Settings & Emergency Taming Checklist

  • JC-40 Switches: Set FX loop to SERIES. Turn the amp's front-panel Bright switch OFF.
  • If it howls or oscillates:
    1. Pull the external volume of the MXR Booster Mini back to 8 o'clock.
    2. Flip the JC-40 loop level switch from -10dBm to +4dBm for more headroom.
    3. Lower the input gain/ratio on the Chase Bliss CLEAN to let the dual compressors breathe.

halbroome

I was heartbroken when my EP-3 Maestro Echoplex (bought for 99 bucks in 1989 at the Starving Musician in San Jose, R.I.P.)
had its ceramic board broken. Replacements at this point are very expensive and have maintenance issues that I don't
want to handle.

So . . . a pedalboard that functions like an EP-3. Lots of choices for the echo sound -- you know them -- but very few
for the feature I valued most. Jimmy Page can keep his pre-amp (but yea, I like it too), I want the SOS, Sound on Sound!

Yea, yea, the El Capistan. I have V1 and like it but not the mono -> stereo bit. Paired with the MXR Mini-Booster it does
sound close to the original EP-3, I'll admit.

But the Volante won out. For the moment. There's the ECCOS to try! What are your suggestions / boards that do the same?

I miss the way the sound loops slowly faded out . . . digital is much too clean. Haven't found the right setting in the Volante
yet to capture that part.


AEROCATONE

Is there a way to choose a preference of not automatically swapping modules when arranging/rearranging? It's so easy to slip or overlap. It becomes difficult sometimes to find where the swapped module ended up. I know there is a rack lock feature, but I would like to be able to arrange and manually swap when necessary, without locking it entirely.

Also, would you be able to split the difference when zooming in and out? I find that the sweet spot for my rack would be halfway between what is too big for my screen and what is too small. It makes pretty big jumps.

Thanks so much for all you do!! Your service is invaluable to the community!

over:under


Feeding an envelope CV into "Feedback CV" is the magic sauce. Causes the sound to go: piewwwbzzzz!


Thread: Bad hair day

VCV Rack + some field recordings


Simstrument

Congrats on getting those cables so beautifully organized!


modulargrid

Since scammers continue to target users on the Marketplace, I have added another layer of security: a VPN check.
Not every VPN user is a scammer, but every scammer uses a VPN. From now on, when a user creates or edits an offer, we check whether the connection is being made through a VPN and display the result on the offer. I think it's fair that other users should have access to this information.
The VPN check is only an indicator and may not always be accurate.

Beep, Bopp, Bleep: info@modulargrid.net


noodle_hut
Thread: Nerd sex

YouTube closed captioning really sells the NerdSeq

--


modulargrid
Thread: Change Log

Modules filter by passive

You can now filter modules using the Show only passive checkbox. This will show modules that do not draw power from the power rail, such as mults and power supplies.

Beep, Bopp, Bleep: info@modulargrid.net


modulargrid
Thread: Change Log

Filter messages by user icon

In the Messages inbox and outbox, in the right-column action menu, there is now a funnel icon that filters messages from the selected user.

Offers VPN check

Since scammers continue to target users on the Marketplace, I have added another layer of security: a VPN check.
Not every VPN user is a scammer, but virtually every scammer uses a VPN. From now on, when a user creates or edits an offer, we check whether the connection is being made through a VPN and display the result on the offer. I think it's fair that other users should have access to this information.

The VPN check is only an indicator and may not always be accurate.

Beep, Bopp, Bleep: info@modulargrid.net


GKMsound


GKMsound



A massive thank you to @halba !
Chill guy and stellar seller with excellent communication and most importantly... good item knowledge.

As a beginner in modular synthesis, I really appreciated his patience in answering all my questions and also for genuinely refusing to sell me something I didn't need and also explaining why...

Shipping was incredibly fast, and the package arrived in just a few days with all original cables and packaging included.
The modules are in absolute mint condition and clearly well-cared for. I can highly vouch for him! Cheers


Is it just me or is this module brilliant? I ordered the parts and will be making it next week but it seems to me this is a post mixer extra channel for your kick with side chaining, envelope follower and ducking vca all included. In just 4hp that's brilliant for space restricted portable techno synths. Also I haven't seen any other European brand make something like this. Do any of you have experience with it?


Seems like you are saying you connected everything correctly you believe?

I guess check patch cables are worting
Maybe try each of them one at a time (remove the others from the case) to see if you can narrow it down to one modile causing the issue.

I'd post also on modwiggler also, people can be quite helpful. Add photos if you can and details on your case / power supply etc

-- Traxam

Hi Traxam,

Yes i believe i have connected the ribbon cable correctly at the module end, i looked at the back of the Stereo Strip and the connector on the right side distinctively read -12v the a small vertical white line so i lined up the red stripe to that, i have checked this and it was correct so its not that, and the other end has a shrouded connection.

But have taken your advise and registered with Modwiggler just waiting to be accepted in
Thank you


Smooth purchase from @pippen . Recommended seller.


Seems like you are saying you connected everything correctly you believe?

I guess check patch cables are worting
Maybe try each of them one at a time (remove the others from the case) to see if you can narrow it down to one modile causing the issue.

I'd post also on modwiggler also, people can be quite helpful. Add photos if you can and details on your case / power supply etc


Don't feel deflated. It's going to happen.
We've all dinged modules along the way, some that we loved.
There are complexities in the craft and The Red Stripe Lesson is a harsh one.
-- noodle_hut

So you think i’ve blown the modules then? i didn’t get any smoke or smell of anything