8-Step Pitch & Gate Sequencer
This 8-Step Sequencer hosts a broad range of functionality in a compact design.
It has simultaneous, independent pitch, gate and trigger outputs. Each step features its own independent pitch control (0V to 10V). Switches also allow the gate and trigger outputs to be controlled per step i.e. run, skip or reset. The run position produces a gate and trigger output for the specific step. The skip position simply omits the gate and trigger outputs for the specified step and the reset position reverts the sequence back to step 1. It can be selected on any step to produce a sequence length between 1 and 8 steps. The sequencer can also be reset via a reset input using a CV signal or via the manual button on the front panel.
The sequencer uses an external clock signal input to run. A through (thru) output is also provided to chain the clock signal to more sequencers or similar modules. The clock can also be stopped using a switch on the front panel. This allows the user to use the manual clock button to step through the sequence.
Additional features include a hold input, that holds the sequence on the current step. This can also be manually selected with the button on the front panel. Also, both pitch outputs have independent glide (portamento) controls that vary the glide time between notes.
Features
https://www.wavefonix.com/product-page/8-step-sequencer
This Module is currently available.
$258