Trigger count divider

TimeDiv counts incoming triggers and outputs only 2nd, 4th, 8th, 16th, 32nd, 64th, and 128th as gates. Duration of each gate is always half of the input steps respectively for each output. So the gate of /8 output will last 4 triggers, the /64 will wait 32 steps to turn off and so on.

The module can also be used as octaver outputting 7 octaves down as 50% pulsewidth square waves, and it will work that way up to 10kHz of the input signal.

So this is basically Doepfer A-160.
But with additional 1/128 output.
And a reset button.
And a buffered pass through of incoming signal.
And it's cheaper.

• 170 mA +12V
• 40 mA -12V
• 0 mA 5V
• 26 mm Depth

This Module is currently available.