Mogg style console panels (various configurations).

Moog Style "console panels", comprising:
- CP3 or CP3A mixer PCB
- 992/CP3O switch/adder PCB
- jack field (mutiples, trunks, or controller in/outs).

The dual function mixer PCB can be assembled as either a CP3 (with click filter) or as the op-amp based CP3A without click filter. An optional performance control allows the output of channels 1+2 only, all channels, or 3+4 only. Single PCB design, all through hole components.

The 992/CP3-O switching/adder PCB enabled switching of controller inputs to oscillators or filters. Inputs from controllers and outputs to oscillators or filters are located on the rear of the module. Single PCB design, all through hole components.

The panel can be copnfigured to meeet the indidivual builders need - example module shown, console panels are the "standard" eurorack height of 128.5mm.

Available early 2022.

www.fitzgreyve.co.uk

• 40 mA +12V
• 40 mA -12V
• 0 mA 5V
• 35 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup