multi cable tester

NEXUM is a customizable multi cable tester.
what?

You can test cables with a maximum of 20 pins in three formats:
• 2.54mm  2x8 - 2x5 / 2x8 - 2x5 headers
• 2.00mm  2x10 / 2x10 headers
• 1.27mm  2x10 / 2x10 headers
At the bottom there are four sockets to test:
• TS cables  mono patch cables
• TRS cables  stereo ones

The connection is considered true - blue LED lit - only if there is no continuity
between the adjacent wire of the cable or discontinuity in that specific core1
.
There are also two LEDs indicators directly wired to the power lines that will let
you know if the -12 or +12 are misbehaving.
It’s a module for the mass-producing-cables-addicted but also for testing a single
one before powering up a new module.
Be sure that all the spaghetti are working before a gig. Just test them all!

features:
• Eurorack power cable tester - 10 pins and 16 pins 2.54mm
• Mono and stereo patch cable compatibility - 3.5mm
• Additional 20 pins 1.27mm / 2.00mm sockets
• Power line indicators
• “whatever” power connector on the back = don’t care about the polarity

technical specs:
current draw  3min / 75max +12V, 3ma -12V, 0ma +5V
dimensions  width 8HP, depth 18mm

Demos and build documentation at jolin.tech

https://jolin.tech/nexum

• 75 mA +12V
• 3 mA -12V
• 0 mA 5V
• 18 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.