vumeter stereo or 2x mono

NEW MODULE!Available on may

The VUMETER module consists of a 2x12 segment level indicator (this element is not designed and manufactured by ph modular), integrated into a module in Eurorack format.
A complete connector on the back allows you to connect the VUMETER directly to the MIXER++ V2 module. It can also be used independently for one stereo signal, one or two mono signals.

A lighted button on the front allows access to the many integrated settings (a jumper on the back allows you to deactivate the LED).

Operating modes
(excerpt from the manufacturer's manual)

The data will be saved automatically every 5 seconds after changing the setting. Attention, if the power supply is modified immediately after the change, the modified data will not be saved.

Each LED has a separate current limiting resistor, ensuring the same brightness at different colors. The signal input through the op-amp isolation, avoid high frequency AUDIO interference.
NB: Depending on the power supply used in your eurorack enclosure, there may be very slight noise at high frequencies.

Setting modes:
- Column Display: Light moves up and down 1 segment depending on signal strength.

• Vertex fall back: Light goes up and down 1 segment depending on signal strength. Highest segment is held then quickly drops after 0.5 seconds (default mode)

• Rising vertices: starting to rise and fall according to the strength of the signal, the highest point remains a light, and after 0.5 seconds it will start to rise rapidly

• Center diffusion display: centered on lights 6 and 7 and displayed on both sides depending on signal strength

• Single point display: light goes up and down from 1st depending on signal strength

• Single point: vertex fold

• Single point: the summit rises

Manual: soon

This module is Inspired by the "VUM" module from Stéphane Cavi (cavisynth) - https://cavisynth.com/product/vum/ - with his kind permission. Big thanks to him.

The price includes: module, screw M3 and connection cable. Excluding shipping costs !!

Manufactured by ph Neutre
Available as an assembled Module, no kit.

To order, please contact me (phneutre56@gmail.com) the terms of payment, delivery times and shipping costs, will be detailed by return mail.
The payment will be in euros (€) and can be done by paypal. Delivery possible in the world, please contact me (phneutre56@gmail.com)
Shipping costs :

• 30 mA +12V
• ? mA -12V
• ? mA 5V
• 27 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup