gate pulses modifier (length & time offset)

arduino based eurorack module to
*) increase or decrease length of incoming gate
*) apply time offset to a gate
*) add or remove single gate pulses

this module needs a steady incoming gate/clock preferably from a clock divider.
the "unit" Homogate is dealing with is always the time interval of the incoming gate.

the potentiometers for length and offset are 0% to 100% where 100% is the incoming interval
In case the sum of both potentiometers exceeds 100% the offset pot gets priority and the length gets the maximum remaining time of the interval

there are 2 instances of Homogate in one 6HP module whilst the gate input from Instance 1 is normalized to input instance 2

very useful in combination with the TuringMachine (https://github.com/TomWhitwell/TuringMachine)
this module gives us the possibility to nudge a locked sequence left and right on the "timeline" by adding or supressing single gate pulses

https://github.com/othmar52/eurorack-homogate

• 19 mA +12V
• 0 mA -12V
• 0 mA 5V
• 38 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup