Dual VC Amplifier/Saturator

DADA is a dual, full-featured vca and saturator. The top and bottom halves are identical. Features include:

· inverting and non-inverting inputs (summed).
· Exponential control input (unipolar).
· Linear control input (bipolar).
· SYMMETRY control (input offset).
· Initial gain setting.
· Dual bicolour led level indicator. Each indicates either the positive or negative going portion of the signal.

Saturation begins to occur once the input amplitude surpasses 5 volts, and increases between 5 and 6 volts. Beyond 6 volts signal amplitude, the output moves beyond saturation into full distortion.

The led scheme is as follows: green indicates a clean signal, yellow indicates saturation, and orange is distortion.

Input attenuators on the control inputs allow you to dial anything from clean to clipping.

• 35 mA +12V
• 35 mA -12V
• ? mA 5V
• 25 mm Depth

Available as an assembled Module and as a DIY project.

This Module is an early prototype, a concept in development, or an AI mockup