CV Generator with four connected Triangle LFOs

The rate of each LFO may be adjusted with the dedicated potentiometers. Each LFO signal is supplied on the four outputs on the bottom side of the module.

The fours LFOs are connected to each other creating an LFO-chain. If the first LFO starts to fall the next LFO will begin to rise. If the second LFO starts to fall the third LFO will rise and so on.

This way you can set the time when a single LFO should start to cycle. Patching all LFOs into a VCO´s sound shaping functions you can create wave-like sounding effects that will repeat periodically. This module is very good for generating very slow cycles when the RATE switch is set to SLOW. Conversely, it can also generate fast cycles when the switch is set to FAST.

Depending on the potentiometer settings it can also create slope like waveforms. Please refer to the demo video below.

The state of each LFO is being indicated by the illuminated letters W A V E on top of the module. Each letter will light up when its dedicated LFO will cycle.

Details:
• 4x LFO Out
• 4x LFO Rate
• Rate Switch
• Skiff friendly
• Wrong polarity protection
• Illuminated Wave-Logo

The module consists of two boards:
• Front PCB Panel
• Main PCB

https://www.st-modular.com/

• 34 mA +12V
• 25 mA -12V
• 0 mA 5V
• 25 mm Depth

Module is available as a DIY project only.

This Module is currently available.