Cycling Sequential Switch

• 4:4 cycling sequential switch.
• simultaneous forward/reverse stepping, hold, reset.
• voltage controlled mode based on the same design as our VC Sequencer.
• push buttons for each function.
• All analogue circuitry - no software or micro processors!
• All low latency CMOS and Opamp circuitry!
• essentially four separate switches that are commonly controlled and shared ins and outs.
• schmitt trigger inputs.
• slim 8HP footprint.
• compact 46mm Depth (with power cable attached).
• low power draw: 30mA +12V / 8mA -12V / 0mA +5V.
• Works for audio as well as CV.
• Fast responding CV inputs allow clocking to reach through entire audio range.

https://synthcube.com

• 30 mA +12V
• 8 mA -12V
• ? mA 5V
• 46 mm Depth

Module is available as a DIY project only.

This Module is currently available.