Dual VC Gate Modifier / Trigger Delay

Take an incoming Signal above ~1.1V (OpAmp Comparators on the Inputs make very forgiving Clock Inputs)
and shrink it down to 5MS or lengthen it up to 5 Seconds.
That Gate will appear at the Gate Out.
When the Gate is Over a 10MS Trigger will turn on at the Delay Out.
Set the length of the Gate with the Time Potentiometer OR with the CV Input.

The Delay 1 Out is Normalled via the Jack switch of the Clock 2 Input for all kinds of Timing madness!

http://animodule.bigcartel.com/product/gate_mod

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 35 mm Depth

No info about availability.