Envelope follower 1U

Suiveur is a simple envelope follower

In1 (AC coupled) and In2 (DC coupled) are added and produce one envelope Env and an inverted one -Env. Incoming signal levels have to be controlled with an external atenuverter as Draag for instance.

Smooth pot sets the overall envelope shape.

Threshold pot sets the sensitivity. The gate stays opened until signal fall down back under the threshold. To set the threshold, first turn the threshold knob fully CCW. Then turn it CW until you trig the gate. Above this point, the more you turn CW, the longer the gate stays opened.

On the back you'll find :
- One input which is normalized to In1 to plug incoming signal from others Oms In Serial modules with Dupont cables.
- One inverted copy of In1 + In2 to be chained to others Oms In Serial modules with Dupont cables.

https://youtu.be/eaC1m-kwfSY

https://www.omsinserial.com/p/blog-page_18.html

• 19 mA +12V
• 17 mA -12V
• 0 mA 5V
• 31 mm Depth

This Module is currently available.

Module is a 1U tile in Intellijel format