Pad controller

Archetype. Eurorack Pad Control System by SynthesisRepublic.

-

Based around velocity and pressure sensitive Pads. These modules, each of which play a unique and individual role in a system.

-

Module 002 has Three sections.
One: the CV knob (Variable Voltage Source), Two: the Button (Soft Latching Switch, 5V “Gate Hold”), and Three: The Pad section, which includes a Press knob that alters the attack and release response of the Pad at the Press and Velocity outputs.

-

Pressing the Pad Generates a Gate Signal

Pressing the illuminated Button will latch or hold a Gate signal until the Button is Pressed again.

Pressing the Pad Generates a Velocity (Vel) Signal. This signal will vary depending on how the Pad is struck.

Pressing the Pad generates a Pressure signal. This signal will vary depending on how the Pad is pressed. Light pressure will produce lower signal (voltage).

Turning the CV knob will vary the signal.

Button holds or latches Gate signal.

Turning the Press knob effects the attack and release response of the Pad at the Press and Velocity outputs. This can be useful for swells, bowed sounds or other modulation destination.

Turing the CV knob varies the signal at the output.

Pressing the Pad generates three signals, simultaneously. Gate, Velocity, and Pressure at their corresponding outputs.

https://m.youtube.com/watch?v=H44DhEVqUos

https://reverb.com/shop/synthesis-republic

• ? mA +12V
• ? mA -12V
• ? mA 5V

This Module is currently available.