Stereo FM/AM/SW Radio Receiver with Tuner Modulation

The VCRadio is a voltage-controlled FM/AM/SW stereo radio receiver with modulation capabilities. The unit generates a continuous stream of audio content, noises, squelches and broadcasts, depending on where you are located in the world. The unit will easily pick-up any station or noises lurking at any frequency within the selected range.

Connect a LFO in the CV input to modulate the TUNER knob and create beats/patterns of mixed radio signals and noises! Please note that the VCRadio is a highly sensitive device, it will respond very well to LFO cycles below 7Hz or 8Hz. But above this rate the unit will tend to ignore the modulation.

Features

• 1 radio receiver (FM – AM – 6 bands of Short Waves)
• 2 LEDs for indicating if the radio signal is strong (STATION) or stereo (STEREO)
• 1 CV Input (with gain) to modulate the TUNER knob with an external signal (-5V – +5V)
• 3 audio outputs (LEFT, RIGHT, SUM)
• 2 antennas (telescopic for FM/SW and ferrite loop for AM)

Radio Bands

• FM Radio (88 – 108 MHz)
• AM Radio (520 – 1710 kHz)
• SW Band 1 (2,3 – 2,5 MHz)
• SW Band 2 (3,9 – 4,0 MHz)
• SW Band 3 (5,6 – 6,4 MHz)
• SW Band 4 (6,8 – 7,6 MHz)
• SW Band 5 (9,2 – 10,0 MHz)
• SW Band 6 (11,6 – 12,2 MHz)

https://xaudiosystems.com/vcradio/

• ? mA +12V
• ? mA -12V
• ? mA 5V

This Module is an early prototype, a concept in development, or an AI mockup