CV FM radio module in 1U.

TheBeep Boop CV FM Radio is ready to receive transmissions and be shipped around the world!

The Taperack system needed a noise source and after watching a documentary in which Delia Derbyshire describes white noise I felt inspired.

What better noise source than a radio between stations?

Imaging what it would have been like to make Tape music before synthesizers lead me to start experimenting my Nans old radio which lead to this module.

I don't make a oscillator so I think a radio is rather fitting for the Taperack system. Perfect for sampling the into the uTape scrubber (or upcoming 1U Taperack system).

https://youtu.be/USicAj1yd1U

The module is a manually scannable CV FM radio for eurorack. The radio is tuned using either it's main manual frequency scanning knob or with a bipolar CV signals

The large TUNE knob scans the full range of FM stations.

The smaller knob can be used as a fine tune when no CV in patched into the CV input jack.

Once CV is applied to the CV input jack the second knob acts as an attenuverter as it best suited for signals between +/-5V.

The audio output is at +/-5V ready to be processed in your modular eurorack system!

The module comes with an AM coil fitted to the rear which improves the reception at lower frequency stations but does make the module 55mm deep. 

Includes power cable and mounting screws.

Specs

Height = 1U (Intelijel format)

Width = 18hp

Power consumption = +12V 28mA -12V 10mA +5V N/A

https://beepboopelectronics.co.uk/product/bbcv-beep-boop-control-voltage-fm-1u-radio/

• 28 mA +12V
• 10 mA -12V
• 0 mA 5V
• 55 mm Depth

This Module is currently available.

Module is a 1U tile

$138