combining transient detector

SINGOLI is a 7 channels DC coupled active combiner with an analogue transient detector output.

why
• To mix up to 7 audio sources and control voltages.
• To output a short gate that follows the peak amplitude of all the inputs combined.
• To trigger drums or open VCAs following the amplitude of any given signal.
• To expand Tutto&Sempre with 7 more mono channels.

with
• Oscillators – mix their output and get complex waveforms.
• Drums – trigger them following the transients of other sound sources.
• CV – combine them for evolving unpredictable sequences.
• VCAs – use the T out to open the amplifier following the dynamic range of the input: compressor.

how
All the inputs I are equipped with LED meters and a dedicated attenuating potentiometer.
O will give you the combined mixed output .
T is an additional transient detector out, It will fire only when a certain threshold is detected from the sum of all the inputs.

features
• DC coupled mixer with 7 inputs and individual attenuators.
• Intensity sensitive LED meters on all the inputs.
• Analogue transient detector output.
• Toggle switch to activate / deactivate its normalization to Tutto&Sempre.
• “Whatever” power connector a.k.a. don’t mind the polarity.

Demos and build documentation at jolin.tech/singoli and on our IG @jolinlab

https://youtu.be/MX6DMr5SnkU

https://jolin.tech/singoli

• 15 mA +12V
• 10 mA -12V
• 0 mA 5V
• 25 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.