Voltage controlled 3 position switch

A Voltage controlled, 3 position switch. Where the inputs can be attenuated and are normalled to 5v.
The position is selected with control voltages.
"+": above +1.7 volts.
"o": between -1.7 and + 1.7 volts.
"-": below -1.7 volts

The voltage range for the 3 inputs is -5 to +5 volt. when higher, it can be attenuated to prevent clipping.

There is an input that is summed with the output. So it is like a global offset input.
The position CV has a multiple, so it can be passed thru to another module.
It has 2 ouputs, they are simply connected.

• 15 mA +12V
• 2 mA -12V
• 0 mA 5V
• 25 mm Depth

Available as an assembled Module and as a DIY project.

This Module is an early prototype, a concept in development, or an AI mockup