Dual Voltage Controlled Amplifier

The 2xVCA is two independent DC-coupled circuits.
Version 2 has BA662 clone chips in socket.
Version 3 has BA662F chips.

CV ATTENUATION KNOB | Determines the amount of CV (control voltage) will affect the loudness.
BIAS KNOB | At 12 o’clock is silence. Turn CW it will behave like a volume knob. If the CV input is an LFO, the result can be tremolo. If the CV is an inverted (negative-going) envelope, the signal can be ducked. Similarly, turning the bias CCW will clip the lower portion of the CV signal. If your CV is a positive envelope, the lower half of the envelope can be cut off.
LINEAR SWITCH SETTING | good for longer sustained sounds
EXPONENTIAL SWITCH SETTING | good for short, plucky percussion type sounds.

Check for availability in my Reverb Store http://reverb.com/shop/gstormelectro

• 19 mA +12V
• 17 mA -12V
• 0 mA 5V
• 30 mm Depth

This Module is discontinued.