passive quad stereo 50% attenuator

TRIMM is a 4‑channel passive 50% attenuator. Each channel is stereo, with normalled connections when used with mono patch cables.
TRIMM provides four identical attenuation stages, each reducing the input signal to 50% at its output. When used with mono cables, only the left input jack of each stereo pair is active, and its signal is normalled to both outputs, so a single input on channel 1 can be taken from outputs 1, 2, 3, and 4 at half level. If you chain channels in series, each stage applies another 50% reduction, so the signal is halved on every subsequent TRIMM channel in the chain.

• Module is passive
• 30 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup