Pedalo is an FX loop module with voltage control over wet/dry mix

Pedalo is an FX loop module that allows you to add guitar FX pedals to your patches.

• CV controllable Wet/Dry mix for dynamic FX patching
• Send attenuation to the tweak level into the stompbox
• Boost and attenuation of the return signal
• 6.35mm ( 1/4") send and return jacks
• Available as a module and an easy to build DIY kit

Eurorack audio signals are typically around 10V peak-to-peak, while guitar pedals are designed for much lower levels — usually in the 0.5V to 1V range. Without proper level matching, pedals can distort unintentionally or behave unpredictably.

Pedalo solves this by attenuating your Eurorack signal down to guitar level before the effects chain, then amplifying it back up on the return path — allowing stomp boxes to integrate cleanly into your modular system.

On top of this, Pedalo adds voltage control wet/dry mix, letting you dynamically blend between your original signal and the effected signal as part of your patch.

https://www.n8synth.co.uk/shop/eurorack-modules/pedalo/

• 14 mA +12V
• 14 mA -12V
• 0 mA 5V
• 30 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.