Analogue VCO with 6 waveforms and envelopes

Voltage controlled oscillator with motion automation features

Main features:
Waveforms: Square, Pulse, Saw, Triangle, Sine and Noise.
Individual outputs at full amplitude for all 6 waveforms
A mix output with cv controllable amplitudes. (Square not included.)
PW modulation input for the pulse waveform.
Hardsync and softsync.
MIDI controllable.
Octave selector 0-3 and fine tune knob.
Motion modes: Envelopes, Switch, Gang and Off
Fmod1 and Fmod2 inputs for frequency modulation, where Fmod2 also can be controlled by motion modes.
Gate input (0-5V) (or MIDI note) activates the motion
Motion input (0-5V) controls the selected motion mode.
3 buttons and a rotary controller for adjusting the motion modes and parameters.
Knobs for limiting the CV gain levels for mix amplitudes and motion automation.

https://manikk.com/product/motion-vco/

• 66 mA +12V
• 24 mA -12V
• 0 mA 5V
• 28 mm Depth

This Module is currently available.