Dual Passive Attenuator

Two passive attenuators. Each channel has an input, an output, and a knob that turns the signal down from full level to off. Works on audio, CV, gates, and bipolar signals.

In 2 is normalled to In 1: with one cable in In 1, both outputs carry the signal, each at its own level.

Passive: no power, no ribbon cable, 15 mm deep.

Available as a DIY kit (22 through-hole solder joints, a good first build) or assembled.

Open hardware (CC BY-NC-SA 4.0). Manual and assembly guide:
https://schenktronics.com/docs/st-02/

https://schenktronics.com/product/st-02/

• Module is passive
• 15 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.