Everything you want in a 31hp sequencer.
The AIO Sequ, or All In One Sequencer, is everything you could ever ask for in a 31hp step sequencer. Well, ok, admittedly it doesn't have swing, and it doesn't have the Xanu logo on it, and doesn't actually say AIO Sequ on it, but let's be honest, you'd rather a lot of functionality than branding and labeling, yes?
There are 8 parts to this sequencer: the clock, transpose in, reset in, 5th outs, glide, steps, individual cv and gate outputs, and master cv and gate outputs.
The clock is what controls the speed of the sequencer. It has a knob to control the speed of the internal clock, a CV (Speed) input to control the sequencer's speed via voltage control, and a clock input to use your own clock and override the internal clock. The LED by the knob shows the clock speed visually.
Transpose in is exactly what you might expect: input a voltage, and the master CV output is transposed by that voltage. So, say the Master CV voltage is 2V, and you put a 1V signal in the Transpose input. The Master CV voltage will now be 3V. Using the 1V/O standard, this 1V transposition will mean the sequencer is now playing 1 octave higher.
Reset in is also fairly straightforward: input a gate or trigger signal, and the sequencer will reset itself to step 1.
The 5th outs are a bit strange, but are useful if you're using all 10 steps because every 5 steps, these outputs switch between 0V and 5V. It's essentially an odd clock divider.
Glide is fairly useful, but only effects the Master CV output. This is essentially portamento. The switch enables or disables the effect.
The Steps are the real heart of the system here. Each of the 10 steps has a switch to switch between on, off (not skip, mind, it simply acts as a rest), and reset (to use that step to reset the sequencer), an LED to indicate the current step, a CV knob to set output voltage, and a Gate knob to set the gate length.
The individual CV and Gate outputs are just that: each step has its own CV and Gate output. This means that the sequencer can be used not only as a normal sequencer, but also a trigger sequencer. The individual CV outputs can be used for one-shot voltages.
The Master CV and Gate Outputs essentially chain together each of the individual CV and Gate outputs, so you only need one cable to transmit your sequenced voltage or string of gate signals.
And yes, this is essentially one third of the S3qu3nc3r.
No info about availability.
$250