Multiplying 8-Step Sequencer

Step sequencer with Control Inputs for Clock, Reset, Down and Halt.
Threshold for Digital Inputs is 1.2V, the Inputs are protected.

Output Range is switchable
Pos 1: 0...1,2V (for V/O Sequencing) or
Pos 2: 0...10V (for everthing else)
Pos 0: 0 (for Use with CV-Range Input)
Scale-Input for CV-Range, its Voltage is added to the selected Range.
Output Attenuator
2 Leds for Output Polarity (and Level)

The Scale-Input can be used with a Clock-Sequencer (e.g. Doepfer A-161) or a MakeNoise PresurePoints (Gate-Outputs) to combine several Modules to one big Sequencer with a simple (CV-) Mixer. Set the Range-Switch to Pos 0 for this Purpose.

(Actually 5 existing Modules)

• 30 mA +12V
• 10 mA -12V
• 0 mA 5V
• 21 mm Depth

Available as an assembled Module and as a DIY project.

No info about availability.