Sampler / Looper

Record Sample Rate: 174 seconds in stereo at 48Ks/s.
This isn't an "up to" spec., it's better than CD quality for almost 3minutes!
- Maximum Record times / quality per channel:
174 seconds @ 48Ks/s 16 bit >CD Quality
248 seconds @ 24Ks/s 16 bit >FM Radio Quality
11.6 minutes @ 12Ks/s 16 bit >AM Radio Quality
23.2 minutes @ 6Ks/s 16 bit Retro Sampler Quality
46.4 minutes @ 3Ks/s 16 bit Min Voice Quality
92.8 minutes @ 1.5Ks/s 16 bit LFO, Wave making Quality )
- 10 octave Sample Rate Playback range via CV + Rate Knob offset
- Knob Take-over Sample Rate recall for each Mode transition:
- LED circle direction indication (four flashes) and present Rate position indication
- "Smart Take-over" eliminates "hard" jumps by becoming active once Knob returns to previous position
- "Slide-To" for moving away from previous sample rate position

I/O:
- Trigger inputs for Record/SOS/Delay/Play/Clock, Creating Slices, Playing Slices, PlayFX start/sync
- Gate input for PlayFX
- Footswitch (S-Trig/Gate) for Record/SOS/Delay/Play, PlayFX start/sync/stop
- Bipolar CV inputs for Sample Rate Control/offset, EQ bands, with attenuvertors
- Unipolar CV inputs for Slice Selection, PlayFX start and End Control offsets

Audio:
- Stereo Inputs 10V p-p L&R all samples rec/play in stereo
- Feedback Return input isolated mix to sampler, Feedback insert return
- Stereo Outputs 10V p-p L&R
- Blend Control to mix incoming audio with outgoing audio
- Feedback Level control for send, or third output channel of sample output only (for multiple amps)
- intelligent auto fade-out for echo and layer stops independant of input mix setting (1/2 cross fade)
- Spectrum Analyzer for RGB "Color Organ" audio indication/analysis.
- Absolute Zero Latency Audio, absolutely!
- Zero Crossing Point Loop Lock and Soft-Mute technology for click free speed looping.

RP (record/play) Sampler Modes:
- 3 Main RP (Record/Play) Modes: Layer, Echo (delay), R/P Sampler (simple record/punch-in/append)
- Foot Switch compatibility Mode (S-Trig) for foot controlled sync'ed echo/looping/layering
- Record (Continuous) PlayFX and Slices simultaneously into delay/sample/layer for Looping afterwards
- Auto-Slices R/P, Echo (delay), Layer action points for instant recall using Slice Select/CV
- No "Memory Full" stop of recording, loops forever! Good to recall recent sequences via Play Slices
- Clock Trigger Synchronization of Layer and Echo by "Arming" Steps
- Clock Trigger input with /1 - /16 setting for arm rec/arm delay/arm Slice & playFX sync

Sample Slicing:
- Sample Slicing during any mode (Record/Play/Echo etc), up to 400 slices, via T/G input, audio peaks, or Slice button.
- Peak Auto-Slicing by audio levels and intelligent noise floor, amplitude angle/delta algorithm.
- Slicing format controlled intuitively by Mode:
. Record: Sequencial Slicing (Slice End = Next Slice Start)
. Echo (delay) / Layer (SOS) : Loop size slices starting at slice creation
. Infinite echo/Layer play: Loop size slices starting at slice creation
. R/P Play loop: Sequencial
. Play FX Start/End, Position/Size miniLoops: Loop sized slices starting at slice creation
. PlayFX G-Move: Present G-Move position
- Sequence Slices via CV voltage ratio / # of Slices and Slice Play trigger
- 1-16 Manual Slice Play selector/ CV offset with LED Slice# indication
- Slice Sample Rate recall + Rate knob offset + Rate CV offset
- Variable Rate Slicing to increase record time drastically when HIFI not req'd with "as created" playback
- "Slice Groove" Automation feature: Record a tap sequence using selected slices, then loop playback!
- Sliced RAM record protection, to protect created slices during continuous recording

PlayFX:
- 3 PlayFX Modes to play sections of RP Sample at any time, slice-able
- PlayFX (all modes) inside of slices (global) and button controlled permanent Slice modification
- Simultaneous Record and PlayFX/Slice to loop/echo out applied FX.
- PlayFX Trigger input for Start/re-start miniLoop Play

PlayFX Modes:
- Loop Start/End controls & CV's for Sample/MiniLoop/Slice/G-Move Playing
- Reverse PlayFX when in Start/End Play mode (by reversing Start and End controls)
- Loop Position/Sizes & CV's for constant Loop size while panning through Sample/MiniLoop/Slice
- G-Move Flowing Granulizer Direction/Speed and Grain Size knob and CV controllable. Sizes: < 1 mS to 250 mS.
- G-Move Granulizer "roll space" can be defined by presently playing MiniLoop, Echo/delay, Layer or Slice boundries.
- Layered PlayFX priority: MiniLoop/Granulize inside a Slice, Granulize inside of a MiniLoop, Slice over a MiniLoop.
- Play FX or a Slice while still Recording / Layering / Echoing via Buttons or T/G.
- Built in CV band controllable EQ for fine tuning feedback and FX output. Flat band mode for CV VCA FX.
- FX (Left) channel feedback insert for external send return filter insertion. Adjustable Send 10V P-P standard.

Interface:
- 32 LED Indicators, 9 for LED Circle to indicate Last Rate upon return from/to modes and Slice Select/Clock div set
- Power up panel Last Settings memory
- USART, audio and data bus Interface for possible Future Expansion:
MIDI controller, Extra audio, CV, SD Card/USB drive, Slicer/sequencer, Splitter, all of the above (Super Looper?)
- Arduino Atmega 2560 16AU with on-board USB
- Firmware Upgrade-able, ships with V1.00 as of March 2016:
. Highly possible additions to feature list:
. Slice overdub, Peak slice "back slice" alignment, Auto calibrate (Feedback Max Position), Auto Calibrate ( CV's)

http://www.freshnelly.com/reflex/reflexhtml.htm

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 46 mm Depth

Available as an assembled Module and as a DIY project.

No info about availability.