Frequency Divider with two interacting Inputs and Sine Outputs

Frequency Divider with Octaves an Quints

Both Inputs have a Comparator-Circuit with 2 Thresholds and generate 4 Pulses per Cycle of Inputsignal
- This allows to generate a stagered Waveform similar to a Sinewave on all Outputs, there are up to 32 stages on the "Divide by 8"-Signal.
- On the other Hand: The Output depends on the Level of the input Signal, therefor it is interesting to use an adjustable (or Voltage controlled) Attenuator for the Inputsignal.
- The pulses of the two Inputsignals are added for the Dividersection of the Circuit, resulting in an effect that resembles to a Ringmodulator.
- The upper Input is normalized to the lower Input with an additional Attenuator in between, resulting in a doubling of the Outputfrequency. Therefore, the "Divide by 2"-Output has the same Frequency as the Input-Signal when used like this, the "Divide by 8"-Output indeed is only -2 Ovtaves then.
- A Mixer allows to sum he five individual Outputs.

The Module is actualy a first Prototype only.

• 90 mA +12V
• 20 mA -12V
• 0 mA 5V
• 45 mm Depth

Module is available as a DIY project only.

No info about availability.