Low Frequency Oscillator

Module A-145 is a low frequency oscillator, which produces cyclical control voltages in a very wide range of frequencies. Five waveforms are available: sawtooth, inverted sawtooth, triangle, sine and square wave.

The LFO can be used as a modulation source for any number of modules - for instance modulating the pulse width or frequency of a VCO, modulation of the cut-off frequency of a VCF, or amplitude modulation with a VCA.

A three-way switch lets you select three frequency ranges, spanning from one cycle every several minutes at the lowest, to moderate audio frequency at the highest (about 4-5 kHz).

The LFO signal can also be synchronised, via the reset input.

For more detailed information please look at the English user's manual: http://www.doepfer.de/a100_man/A145_man.pdf

http://www.doepfer.de/a145.htm

• 30 mA +12V
• ? mA -12V
• 0 mA 5V
• 55 mm Depth

No info about availability.