A true multi-function utility module for every Eurorack system!

Digital to Analog Converter (DAC)

Input gate signals from, say, a frequency divider to jacks 1-128. Numbers represent binary values. Result is an analog sequence present at I/O jack. Confuse inputs for variation.

Weighted Mixer

Input audio or any kind of signals to the weighted inputs for knobless, DC-coupled mixing. Input 1 is the quietest, input 128 the loudest. Why knobless? Just try to re-create a patch and fine tune the knobs to exactly the same, and you'll realize.

Programmable Attenuator

Input a voltage or any signal to I/O jack. From the other jacks you get 8 different voltages divided from the input voltage. 1=lowest, 128=highest. Use multiple outputs with different voltages to control multiple CV inputs with different intensity - good for lively harmonic intervals and chords, filter tracking etc.

Labile Duplex Multiple

Input signals to any jack and output them from the others. Signals get mixed, attenuated and split in various ways.

Goofproof Whatever Station

Combine (or then just forget) everything you have learned about the R2R and just patch stuff in and out!

Please note that the function of the module is not absolute, and everything affects everything else. In return the module is safe to use in any fashion. All the jacks are interconnected by resistors, and there is at least a 20 kilo-ohm resistance between any two jacks. The internal connection diagram is printed on the interface. These resistors make it safe to patch input and output signals simultaneously without short-circuiting them.

Orders and more info: olegtron@gmail.com

www.olegtron.com

• Module is passive
• 15 mm Depth

No info about availability.