Trigger/gate delay module for Eurorack / Doepfer A100 system

From top:
Trig/gate input
Button + LEDs for original („dry“) mixing to output (no/1/2/both by short press) and time range setting (long press)
Delay time 1
Delay time 2 + CV control input
Out1 (here are both outputs mixed if no jack is plugged into out2)
Out2

Basic delay time 0 to 4s can be shortened to 0-1,3s by holding button. Another button hold switches time back to 0-4s.
Resolution (shortest trigger) is 0,7ms.
These time settings can be tripled if internal jumper is set so time range is 0-12s and 0-4s with 2ms resolution.

There can be an „non-rhytmic“ output at moment of changing delay time. Memory is read at different ratio (faster or slower) to ensure no trig/gate is lost. If delaytime change is made with active trigger/gate this trigger/gate can be held active for a while (until desired time is reached).

http://ladik.ladik.eu/?page_id=1558

• 25 mA +12V
• ? mA -12V
• ? mA 5V
• 40 mm Depth

No info about availability.