the Teenage Engineering PO-32 with our Adapter

The describtion is for the adapter not the PO-32. Please visit this site for more information on the PO-Series

The adapter has 4 functions:
* hold the PO in the rack
* supply power from the Eurorack to the PO (no more batteries)
* divide a 16th note trigger /2 so the PO runs same speed as everything else
* boost the output signal

The adapter can be aquired as blank PCB or populated. The attachment to the PO is DIY.

See the pics of a PO-12 conversion here:
https://twitter.com/lpzw_modules/status/911214801698869248

DIY Manual:
http://leipzigwest.org/LPZW/LPZW_PO_Adapter_Manual_V1.0.pdf

The conversion can be done while preserving the sound upload capabilities. You need to use a stereo input jack (Tip: Trigger; Ring: Audio input from Computer - Sync mode 4) or directly connect the two pins on the right channel of the input jack (Mic-->right input; Trigger --> left input)

www.leipzigwest.org

• 45 mA +12V
• 10 mA -12V
• 0 mA 5V
• 20 mm Depth

Available as an assembled Module and as a DIY project.

This Module is currently available.