Trigger/Gate Mute

Prototype Version of the

LPZW.modules SCHLEUßIG

Size and panel layout might change for the final version.

8 channel mute for logic signals (Gate and Trigger) with Toggle Buttons and a grouping feature.
Created for performance setups with drum modules etc. but there is no reason not to mute the gate of a synth voice for instance.

Toggle multiple channels at the same time (mute on or off) either on the release of the "Group" button or when in "sync mode" at fixed point of the beat.
The sync moment can be chosen while holding the sync button.
The sync selection is:
* quarter note (a.k.a. always start with the kick after the break)
* half note (a.k.a. never start with clap on 2)
* bar (a.k.a. get the rest in line too)
* 2 bars
* 4 bars (a.k.a. free both hands to modulate something else in the break)

For the prototype the sync information is derived from the MIDI input. The final version might receive a selectable Clock&Run sync input. (Jumper selection)
The MIDI input is 3.5mm stereo TRS, with our own invented auto-crossover (directly connect either Korg-like OR Arturial-like 3.5mm MIDI out with a cheap standard cable).

Built-In MIDI to Trigger/Gate converter: If you do not plug in a signal to the trigger inputs you can use the internal trigger converter.
There will be a MIDI learn mode so you can asign notes to the channels.

Please feel free to contact us with input, questions and feature requests.

Target release: November 2017

• 70 mA +12V
• 0 mA -12V
• 0 mA 5V

This Module is an early prototype, a concept in development, or an AI mockup