Envelope Follower, Gate Extractor and Rectifier

DETECT-Rx features three useful utilities to expand your modular capabilities.

EXTRACT-R is a voltage controlled comparator with three selectable range settings, LINE LEVEL, 5V and 10V. A Threshold knob sets the trip point to extract a 10V gate signal. CV input for allows for PWM and voltage control of the comparator threshold.

RECTIFY-R is a simple positive voltage rectifier for octave-up and rectifying bipolar signals into positive only signals.

DETECT-R is a versatile Envelope Follower with three selectable frequency ranges, an additional envelope smoothing control and an input gain control offering up to 27dB of input gain to accommodate line and low level signals - including med to hi output guitar pickups.

Some convenient Jack normalizations are provided:

Patching into the DETECT-R only; will normalize the input into the EXTRACT-R and RECTIFY-R, providing all outputs from a single input.

Patching into the EXTRACT-R only; will normalize the GATE output into the Envelope DETECT-R input, producing an extracted GATE based envelope at the EXTRACT-R's output.

Using the Gate output into the Envelope DETECT-R input provides an additional following method based on variable Gate Extraction from the program material.

All normalizations break if additional inputs are utilized.

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 23 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup