Quad attenuator-inverter for Eurorack systems

This is a four channel buffered attenuator and inverter. Zero output is at the center of each control. CCW turns from the center will invert the signal or control voltage input.

• 4 independent buffered channels;
• Attenuate and invert with one control sweep;
• Use what you have! 10k Linear pots are recommended but you can also use log/audio pots;
• SMD parts to save your parts cost;
• Through hole electrolytic capacitors;
• Use TL034 to improve precision and reduce power or use TL074 to reduce costs further;
• 6HP Eurorack with our panel.

Comprehensive manuals, parts lists and component shopping carts are provided in the documentation link for building, testing and using the module.

https://www.tindie.com/stores/pmfoundations/

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 27 mm Depth

Module is available as a DIY project only.

This Module is currently available.