Shaper module for eurorack

Compares input voltage (or ctrl input voltage, normalled to input if ctrl jack is not plugged-in) with adjustable limits (positive and negative). While input signal (or ctrl input) exceeds positive (or is below negative) limit setting then output is switched to DC level set by level knob (0-5V) or to external signal (then level knob serves as attenuator for external signal if ext in jack is plugged). Basially waveshaper with modulation capabilities. S-410 is DC coupled, low offset main signal path so it can be used for processing tuning CVs too.

http://ladik.ladik.eu/?page_id=2128

• 20 mA +12V
• 0 mA -12V
• 0 mA 5V
• 40 mm Depth

This Module is currently available.