Dual VCA with VC response.

• Top VCA :
• two signals inputs with attenuator.
• am input with attenuator.
• initial level.
• linear or exponential response, exponential response has 20 dB extra headroom.
• linear gain response is 10% / V, exponential gain response is 10 dB / V (starting at -100 dB @ 0 V).
• VCA is off (- 100 dB) @ 0 V control voltage, unity gain (0 dB) @ 10 V control voltage.
• frequency response DC - 20 kHz for both signal and modulation.

• output with bicolor signal indication LED.

• Bottom VCA :

• signal input with bipolar attenuator.
• two am inputs with attenuator, one is bipolar.
• initial level.
• VC of response : from linear to exponential, exponential response has 20 dB extra headroom.
• VCA is off (- 100 dB) @ 0 V control voltage, unity gain (0 dB) @ 10 V control voltage.
• linear gain response is 10% / V, exponential gain response is 10 dB / V (starting at -100 dB @ 0 V).
• response CV in with bipolar attenuator.
• initial response.
• response is linear @ 0 V control voltage, response is exponential @ 10 V control voltage.
• cv mix out : mix of am inputs and initial.
• frequency response DC - 20 kHz for both signal and modulation.

• dual output with bicolor signal indication LED.

• Skiff friendly : 35mm deep behind front panel (overall depth including front panel and knobs is 55mm).

• Shrouded header on the power supply connector, no risk for reverse polarity.
• Includes printed manual card and power cable.

More :

• Facebook : Aemit page
• Contact (order) : wim@aemit.be

• 45 mA +12V
• 40 mA -12V
• 0 mA 5V
• 35 mm Depth

This Module is an early prototype, a concept in development, or an AI mockup