Constant voltage Panner / Cross Fader

The Azimuth is back! This is a completely new circuit jam packed with 12 VCAs to perform three core and independent functions:
linear input VCAs + Constant Voltage panning/fading + super stereo processing.

External signals are first processed by the input VCAs, they are then fed to the panning circuit and then processed by the stereo enhancement section.

Features:

Stereo linear input VCAs with independent CV controls and attenuators
WIDTH control determines functionality of the Panning knob:
Full CCW is MONO width and the Panning knob acts as a linear xfade control between the left and right source signals.
Middle setting is normal STEREO operation. A mono signal in the left input can be panned between L/R and a stereo source can be balanced.
Full CW is the super stereo mode which employs a special trick to create the aural illusion of an extra wide stereo image.
Full CV control with attenuator of the width amount
Switch for changing the direction of panning/fading
DC coupled inputs
6pin header to normal the stereo outputs to the stereo inputs of the uJack via ribbon cable.

http://www.intellijel.com/eurorack-modules/azimuth-ii/

• ? mA +12V
• ? mA -12V
• ? mA 5V

No info about availability.