CV to MIDI module by mxmxmx

mmh?
5 x dual S/H units to drive midi equipment ( ... i got a nord drum 2 for cheap, hence was under the impression i needed something like this).
with a little more time/effort, this could be made more compact and so on (i was briefly considering using something cheaper/more suitable (STM32F373R8), but ended up with t3.2 again).
internally, the module re-utilizes the o_C - version of the MI "braids" quantizer; it tracks V/oct fairly ok.
configurable trigger-to-SH "latency" settings (typically helps when re-quantizing stepped control voltages).
CV inputs default to note/velocity; alternatively the "velocity" inputs can be mapped to any CC message ("learn").
w/ micro-USB connector on the backside of the module, so in theory there's the option to also have usb-midi (not implemented, and somewhat inconvenient).
hardware:
trigger/gate in, V/oct, velocity (CV + manual offset) per channel (100k input impedance)
midi TRS in/out (type A/B selectable)
15kHz update rate
teensy 3.2 based
10HP, depth ~ 35mm

https://github.com/mxmxmx/CV2Midi

• ? mA +12V
• ? mA -12V
• ? mA 5V
• 35 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup