Sends voltage/CC via CV/MIDI/I2C

The 16n is a fader bank sending CV, I2C, MIDI jack compatible with all standards, USB MIDI (compatible PC, Mac, iPad etc...) , making it the absolute ultimate controller for any of your hardware and software all in one!

Demo:
https://www.youtube.com/watch?v=edriUxDgTsg

Original project:
https://github.com/16n-faderbank/16n

Modifications compared to the original are:

• Isolated USB power supply. This will greatly reduce the noise on the outputs.

• Selectable 5 or 10V outputs: Each outputs will have a jumper on the back allowing you to decide whether this output sends 10 or 5V (even when using 5V USB power supply ;) )

• Outputs facing upwards: The outputs will be directly on the front panel reducing the footprint and making outputs much more accessible.

• Eurorack compatible: You would be able to mount the 16n as a 50hp module in your rack and power it from your own power supply.

• It will come with a small and stylish DIY wooden case.

• The footprint of the jack will compatible for banana connectors! So you'll be able to use it with your Serge or Buchla system.

• ? mA +12V
• ? mA -12V
• ? mA 5V

Module is available as a DIY project only.

This Module is currently available.