Passive module adds switches to Bastl Instruments Skis module backside jumpers

The 1u (Pulp-size) module can be used to toggle settings available at the backside of the Bastl Skis dual decay + vca module (first version). Upper left switch changes the "Range" or decay length of B channel and the lower changes the decay length of A channel. Dip pins 4 (For B) and 2 (For A) toggle the character to the VCA circuit. Dip switch pin 3 (for B) and 1 (for A) can be set to toggle the "Hold" settings (turns the the decay envelope into release envelope) or alternatively used to control the channel "mute" settings. The unit connects to a custom breakout board at the back of the Skis module using a 10 pin ribbon cable (the breakout adds 15mm to Skis depth).

• Module is passive
• 20 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup

Module is a 1U tile