eurorack essentials flip-sides active module is the powered version of flip-sides with additional function.

Now you can swap two signals via CV in and push-button, plus CV in to Mute All.
Works great with any audio or CV signal. And it is bidirectional.

2 LEDs indicate FLIP (green/red) and MUTE (red) status.

Depending on plugged cables, you can use it for example as:

• stereo fx send channel with mute and flip-sides - very interesting on stereo delays, stereo filters, stereo reverbs.

• mono fx send for two FXs - with mute

• simple on / off switch

• swap two CVs, GATEs, TRIGGERs, LFOs, ENVs or CLocks between two modules with MUTE ALL.

You can change the push-button function via jumper on the pcb.

If a cable is plugged into CV in FLIP/MUTE - and - for example signals are flip/muted at a high frequency - holding down the push-button disables CV in depending on the push-button jumper setting.

flip-sides active comes with 3mm thick aluminium front panel and BEFACO Knurlies.

• 20 mA +12V
• 10 mA -12V
• 0 mA 5V
• 39 mm Depth

This Module is currently available.