Slew limiter with a switch

The 1u (Pulp-size) module is based on a Synovatron design. The same design is used in the
CV Tools Project (revised 2011). A switch has been added to toggle between 1uF and 100nF for better resolution on the short time-constants. This adjusts the max slew time from 1s to over 5s.

• 4 mA +12V
• 4 mA -12V
• ? mA 5V
• 30 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup

Module is a 1U tile