Dual buffered multiples with 1 input and 3 outputs each. The upper normalized to the lower.

manikk Dual Multiple 1 to 3 is a 2HP module that has 2 active buffered multiples. Each multiple have 1 input and 3 outputs.

The output from the upper multiple (jack 4) is normalized to the input (jack 5) of the lower multiple. If no plug is inserted in the input at jack 5, then the upper multiple is extended with 3 more outputs, 6 outputs in total.

The two inputs have a 1M resistor to GND, that makes the OP-amps happy when no input signal is connected.

Each of the 6 outputs have a 1K resistor before the signal is sent to the jack.

The module is based on the Otto Passive Mono Front and has an add-on PCB on the back. The Otto Front have normalizing pins for the 8 jacks, where you can pass-by the input/output signals if no plug is inserted in the associated jack.

See also the FAQ for more tips and tricks.

https://manikk.com/product/dual-active-multiple-1-to-3/

• 14 mA +12V
• 14 mA -12V
• 0 mA 5V
• 35 mm Depth

This Module is currently available.