Dual 3 channel DC-mixer. The upper mixer output is normalized to the lower mixer input 1.

manikk Dual 3 Channel Mixer is a 2HP module that has 2 independent 3 channel DC-mixers. Each mixer have 3 inputs and 1 output.

The output from the upper mixer (jack 4) is normalized to the first input (jack 5) of the lower mixer.
This gives the option to use it as a 5 channel mixer.
If no plug is inserted at the input for jack 5, then outA will be the mix for jacks 1,2,3 and outB will be the mix for jacks 1,2,3,6,7.

Both mixer outputs (outA and outB) have a 1K resistor before the signal is sent to the output-jack.

The module is based on the Otto Passive Mono Front and has an add-on PCB on the back. The Otto Front have normalizing pins for the 8 jacks, where you can pass-by the input/output signals if no plug is inserted in the associated jack. Except for jack number 5 that already are normalized.

See also the FAQ for more tips and tricks.

https://manikk.com/product/dual-3-channel-mixer/

• 7 mA +12V
• 7 mA -12V
• 0 mA 5V
• 35 mm Depth

This Module is currently available.