2x4 DIY Buffered Multiples

Two 1-to-4 Buffered multiples using TL07x series op amp circuitry.
Inputs are normalled via front-panel selection switch, so that Input "A" can be a 1-to-8, bypassing B entirely. If an input is plugged into "B" this normalling is ignored.
Contains a power indicator LED.

• 300 mA +12V
• 300 mA -12V
• 0 mA 5V
• 30 mm Depth

Module is available as a DIY project only.

This Module is an early prototype, a concept in development, or an AI mockup